| arturofg |  |
|
2010-03-22 04:18 - Respuestas: 6 - Tema nº: 2671711
Windows XP Profesional .
T
hola a todos tengo un problema con una placa emachine am37 cuando oprimo el interuptor de encendido solo meda un pitido (largo) y la pantalla no muestra nada
solo queda negra
ayuda porfa...........
he AM37 supports socket 462 Athlon XP/Duron Processors up to 2100+ and above. VIA KM266 Chipset, Performance uATX Mainboard for AMD Athlon XP Processor, 200/266MHz FSB, DDR PC2100, AGP 4X, Ultra ATA 133, USB 2.0 4 port, LAN onboard. AC-97 Audio and embed
Processor
Athlon XP model 8 1700+ and up. Athlon
XP model 6 1500+ to 2100+. Duron
model 7 1G and up. Duron Model 3 950Mhz. Maxiumu Icc core supported:
Up to 46A
Recommanded thermal protection
circuits that are listed in the AMD Athlon Processor-Based Motherboards Design
Guide, PID# 24363
Chipset
VIA KM266
VIA VT8235
BIOS: EEPROM 2 Mbit
Memory
2 Dimm sockets
PC1600/2100 DDR SDRAM support.
SPD support
Liinear Power Supply: Richtek RT9173A.
Audio
AC97 revision 2.1 codec only.
ALC202A/ ALC650 Codec support.
Onboard I/O Connectors
1 PS2 Mouse. With optional 5V Stand by power.
1 PS2 Keyboard connector.
Keyboard Mouse Wake-Up from both S1/S3/S5
Audio connectors on rear side: Microphone-In, Line-In, Line-Out
1 VGA connector
1Parallel port
4 USB 2.0 ports
1 Serial Ports with support for wake on ring
1 LAN connector, including a LAN link beat LED. Dual COlor Mode support.
External I0 ports follow FIC back I0 panel standard.
Onboard IDE
2 dual-channled enchanced PCI bus master IDE conectors, ATA 66/100/133
Expansion Slots
3 PCI Comply with PCI 2.2 33 Mhz/1 CNR support AC97/MC97
Front Side Bus
100/133 MHz. Adjusted by Jumper.
Graphical Interface
North Bridge (integrated graphics)
LAN
Controller: Realtek 8100BL
Wake On LAN
Boot On LAN
CLock Generator
CY283410C
Form Factor
microATX
9.6' x 9.6'
Power Management
ACPI 1.0 rev. 1.0 compliant
PnP 1.0a
SMBIOS 2.3, WFM 2.0
USB 2.0
Suspend to RAM (S3) supported.
Suspend to Disk (S4) supported.
Wake-up from USB in S4 mode
Package Contents
1 x UltraATA IDE cable, 1 x ATA 33 IDE cable and 1 x FDD cable
1 x CD-Plus bundled free software package CD
1 x CD-Pro drivers CD
1 x FDD cable
1 x Manual
1 x motherboard
| |
|
|
| gustdnp |  |
|
Re: Problema con placa base - 2010-03-22 04:32 - Respuesta 2
fijate bien si la ram esta bien incertada en la ranura, si es necesario desmontalas limpialas con con mucho cuidado, con algo q no genere estatica. y luego montalas otravez, luego nos contas | |
|
|
| arturofg | |
|
Re: Problema con placa base - 2010-03-22 04:57 - Respuesta 3
hola quetal gracias por responder gustdnp
bueno ya realice el procedimiento tambien remplce la memoria por otra igual
y nada el mismo pitido largo que otra cosa puede ser
!broo
nuevamente gracias... | |
|
|
| gustdnp | |
|
Re: Problema con placa base - 2010-03-22 05:06 - Respuesta 4
intenta esto, sacale la pila por lo menos 3 minutos luego de colocarla fijate si se para en el momento en q la bios reconoce tu ram o n q momento
| |
|
|
| gustdnp | |
|
Re: Problema con placa base - 2010-03-22 05:13 - Respuesta 5
perdon olvide agregar q tambien kites el conector d la corriente electrica | |
|
|
|
